It's been a great season! Thank you.

I'm still building and selling unfinished chairs at this time.

Sorry but no staining when temps are below 55 degrees.

Here's how to order.

New! Firepit Benches.

Cetol 1 Stain Samples now up.

Adirondack Chairs by pat.

Click for a large image.

Unstained Chairs $175

Stained Chairs $225

Tables $50

Footrest $50

Firepit Benches $50

Free delivery in Minneapolis / St. Paul area.

 

Made of moisture resistant 1 inch thick White Cedar. It's the most comfortable outdoor chair that you'll ever own.

Rock Solid Construction.

Two screws in each back slat.

Click on the above image and you'll see two plugs in each back slat. Under those plugs are two inch screws. Everyone else only uses one screw because it's not an easy connection and takes time to get it right.

It's the reason that 10 years from now your chair is not going to rock from side to side.

Curved Back Support

Your back is curved and so should be your chair.

This is what makes the chair so comfortable.

Rounded surfaces.

Back Rest, Arms and Seat are all rounded over to insure your comfort.

This chair is the end result of 15 years of experience building them. Making improvements and understanding what happens to outdoor furniture over the years.

Click for a large image.

 

 

 

 

 

 

Featured Chairs

Click for a large image.Click for a large image.

Click for a large image.Click for a large image.

Click for a large image.Click for a large image.Click for a large image.

 

How is patsporch different?

You get to sit in your chair before you buy them. No one else does that. No one.

I'm always here. patsporch.com has been around for some 10 years now. Only in the past few months have I expanded into the retail market. Most of my pervious efforts were custom jobs for commercial customers.

You have direct access to the builder of your chairs.

Unfinished Chairs - $175

Stained - $225

If you prefer, I'm more than happy to let you do the staining and you save a bit of money too!

Staining Outdoor Furniture

The stains I prefer to use.

Cetol 1 A transparent stain.. Wood grain shows up very nicely. Satin Sheen.

Custom staining is now available.

You pick the stain or paint and let me handle the mess.

Custom staining requires a 50% non-refundable deposit.

continue

What makes this chair different.

The Wood.

I use a one inch thick white cedar.

The only chair I've ever made in 3/4 inch pine was a protype that only lasted three years. First thing to go were the legs.

Cedar is so much better than the usual pine chair you see. It's light-weigh, strong and most of all it withstands moisture. White Cedar is a swamp wood, pine is not.

The chair still only weighs 25 lbs but the additional 1/4 inch thickness greatly improves the durability of this chair.

Nail vs. Screws

Have you ever had a piece of outdoor furniture that rocked from side to side? I have and I didn't like it. I fixed that, it was really simple

That's the difference between spending a little more time and money on the connections.

A total of 42 coated screws are used in your chair. But you'll never see them. And mind you on the critical joints I use stainless steel bolts reinforced with an outdoor marine adhesive..

 

continue reading